The MBT 153 is a heavy-duty temperature sensor that can be used for controlling cooling water and ventilation systems within general industry and marine applications.
This temperature sensor is based on a standardized Pt100 or Pt1000 element, which gives a reliable and accurate measurement. On request the MBT 153 can also be delivered with NTC/PTC elements.
The sensor is based on a stainless steel housing with a cable, which makes the sensor extremely flexible.
The MBT 153 can be combined with a sensor pocket to protect the silicone cable from the media. The MBT 153 has a PVC or silicone cable as standard but it can be delivered with teflon cable on request.

Temperature range -50 to +200°C

Short response times

Pt100 or Pt1000 resistance element

2- or 4-wire connection

The flexible temperature sensor MBT 3270 can be used in many industrial applications such as: Air Compressors, Mobile Hydraulics and Exhaust gas return systems.
In other words application where robustness, size and performance are essentials.
The sensor can be equipped with different sensing element (RTD, NTC and PTC) and is available with different electrical connections (Cable, Delphi Metri Pack, AMP junior power Timer, Deutch DT04).

• Robust, high protection against moisture
• Fixed measuring insert
• Brass or stainless steel
• Very low response times
• Temperature range up to 300°C

With MBT 3560 we have combined the technology of our standard temperature sensors and the electrical connections from the MBS pressure transmitters with a new developed electronics which has resulted in a compact temperature sensor with a built-in transmitter. The MBT 3560 is designed for use in harsh industrial environments where reliable, robust and accurate equipment is required. Available with a wide selection of process and electrical connections. Can be delivered with a 33 mm extension length which makes it possible to measure temperatures up to 200°C without damaging the built-in electronics.

• Ultra compact design
• Acid-resistant stainless steel enclosure (AISI 316L)
• Temperature range -50 °C - +200°C
• Pt 1000 resistance element
• Output signals: 4 - 20 mA or Ratiometric
• Protection tube: ø 8 mm
• Multiple insertion lengths: 50 mm- 250 mm

The MBT 5113 is a heavy-duty temperature sensor that can be used for measuring and regulating exhaust gas from diesel engines, turbines and compressors within stationary and marine applications.
This temperature sensor is based on a type K thermo couple, which measures temperatures up to 800 °C. The measuring insert can be changed even while operating the application.
All parts in contact with the media are made of stainless steel AISI 316 Ti. The sensor is delivered with B-head as standard and, if needed, a transmitter (MBT 9110) can be ordered as an integrated part of the sensor.

With thermocouple up to 800° C media temperature

Available with built-in transmitter - with or without Eex ia IIC T4/T6 approval

Available with all relevant marine approvals

The MBT 5250 is a heavy-duty temperature sensor that can be used for controlling cooling water, lubrication oil, hydraulic oil and refrigeration plants within general industry and marine applications.
This temperature sensor is based on a standardized Pt100 or Pt1000 element, which gives a reliable and accurate measurement. The MBT 5250 can be delivered with NTC/PTC elements on request.
The measuring insert is based on a silicone cable, which makes the sensor very resistant towards vibrations. All parts in contact with the media are made of stainless steel AISI 316 Ti. The MBT 5250 is equipped with EN 175301-803-A, Pg 9 as standard, but can be delivered with M12 or DIN 72585 Bayonet on request.

• For gaseous or liquid media, e.g. air, gas, vapour, water or oil
• Up to +200°C media temperatures
• Pt100 or Pt1000 resistance element
• Can be used with 2- or 3-wire connections
• Gold plated male and female connector
• Interchangeable measuring insert
• Available with all relevant marine approvals

The MBT 5252 is a heavy-duty temperature sensor that can be used for controlling cooling water, lubrication oil, hydraulic oil and refrigeration plants within general industry and marine applications.
This temperature sensor is based on a standardized Pt100 or Pt1000 element, which gives a reliable and accurate measurement. The MBT 5252 can be delivered with NTC/PTC elements on request.
If needed, a transmitter (MBT 9110) can be ordered as an integrated part of the sensor. In the low temperature version (-50 °C to +200 °C) the measuring insert is based on a silicone cable, which makes the sensor very resistant towards vibrations.
All parts in contact with the media are made of stainless steel AISI 316 Ti. The MBT 5252 is equipped with a B-head as standard, but can be delivered with B-mini or B-head with screw cap on request.

For gaseous or liquid media, e.g. air, gas, vapour, water or oil

Up to +400° C media temperatures

Available with built-in transmitter

Available with all relevant marine approvals

With MBT 5560 we have combined the technology of our standard temperature sensors and the electrical connections from the MBS pressure transmitters with a new developed electronics which has resulted in a compact temperature sensor with a built-in transmitter. The MBT 5560 is designed for use in harsh industrial environments where reliable, robust and accurate equipment is required. Available with a wide selection of process and electrical connections. Can be delivered with a 33 mm extension length which makes it possible to measure temperatures up to 200°C without damaging the built-in electronics.

• Ultra compact design
• Acid-resistant stainless steel enclosure (AISI 316L)
• Temperature range -50 °C - +200°C
• Pt 1000 resistance element
• Output signals: 4 - 20 mA or Ratiometric
• Protection tube: ø 8 mm
• Multiple insertion lengths: 50, 100, 150, 200 or 250 mm

The MBT 9110 temperature transmitter can be used for converting the Pt100 ohm signal or the thermo couple mV signal to a 4 to 20 mA signal. The MBT 9110 can be used together with all types of MBT sensors, Pt100 as well as Thermo couple.
MBT 9110 transmitters in the standard program are delivered in an enclosure, but are also used as an integrated part of certain temperature sensors.
The transmitter is available as standard or galvanic isolated with or without EEx approval.

2, 3 or 4-wire universal transmitter for industrial and marine applications

Pt100 or thermocouple input

4 - 20 mA standard output signal - with or without galvanic isolation

Available with EEX ia IIC T4 / T6 approvals

For mounting in DIN B connection head or in a separate enclosure

Advanced sensor fault indication

Temperature linearized

Available with all relevant marine approvals